Applying Slope Policies - Alcatel-Lucent 7950 Quality Of Service Manual

Applying Slope Policies

Apply slope policies to the following entities:
•
•
•
Global
Use the following CLI syntax to apply slope policies to network egress and ingress pools.
CLI Syntax: config> card 1 mda 1 network ingress pool slope-policy name
port
The following CLI syntax examples may be used to apply slope policies to :
CLI Syntax: config>card>mda>access>ingress>pool>slope-policy name
The following CLI syntax example configures the PPP multilink pool:
CLI Syntax: config>card>mda>access>egress>pool>slope-policy name
Ports
The following CLI syntax examples may be used to apply slope policies to ports:
CLI Syntax: config>port>access>egress>pool>slope-policy name
7950 XRS Quality of Service Guide
Global
config>card>mda>network>egress>pool>slope-policy name
config>port>network>egress>pool>slope-policy name
Slope QoS Policies
Page 525