Overview - Alcatel-Lucent 7950 Quality Of Service Manual

Extensible routing system

Hide thumbs Also See for 7950:

Table of Contents

In This Section

Overview

The adv-config-policy contains queue and policer configuration parameters that are not expected

to be useful to most users. In Release 10.0, the policy only contains queue and policer child control

parameters within a child-control node.

The parameters within the child-control node are intended to allow more precise control of the

method that hierarchical virtual scheduling employs to emulate the effect of a scheduling context

upon a member child queue or policer.

Once a policy is created, it may be applied to a queue or policer defined within a sap-egress or sap-

ingress QoS policy. It may also be applied to a queue or policer defined within an ingress or egress

queue-group template. When a policy is currently associated with a QoS policy or template, the

policy may be modified but not deleted (even in the event that the QoS policy or template is not in

While the system maintains default values for the advanced configuration parameters, no default

adv-config-policy exists.

For information about the tasks and commands necessary to access the command line interface

and to configure and maintain your router, refer to CLI Usage chapter in the System Basic

Configuration Guide.

7950 XRS Quality of Service Guide