Alcatel-Lucent 7950 Quality Of Service Manual page 508

Generic Commands
the queue or scheduler during the above-cir scheduler pass. The parameters that control above-cir bandwidth
allocation for orphans are the orphan-override commands level and weight keywords. The level keyword
defines the port priority level that the scheduler or queue uses to receive bandwidth for its above-cir offered
load. The weight is used when multiple queues or schedulers exist at the same port priority level for above-
cir bandwidth. The weight value defines the relative ratio that is used to distribute bandwidth at the priority
level when more above-cir offered load exists than the port priority level has bandwidth.
The no form of the command removes the orphan override port parent association for the orphan queues and
schedulers on port schedulers created with the port scheduler policy. Any orphan queues and schedulers on a
port associated with the port scheduler policy will revert to default orphan behavior.
Parameters level priority-level — Defines the port priority the orphan queues and schedulers will use to receive
bandwidth for its above-cir offered-load.
Values
Default
weight percent — Defines the weight the orphan queues and schedulers will use in the above-cir port
priority level (defined by the level parameter).
Values
Default
cir-level priority-level — Defines the port priority the orphan queues and schedulers will use to receive
bandwidth for its within-cir offered-load. If the cir-weight parameter is set to a value of 0 (the default
value), the orphan queues and schedulers do not receive bandwidth during the port scheduler's within-
cir pass and the cir-level parameter is ignored. If the cir-weight parameter is 1 or greater, the cir-level
parameter comes into play.
Values
cir-weight cir-weight — Defines the weight the orphan queues and schedulers will use in the within-cir port
priority level (defined by the cir-level parameter). When the cir-weight parameter is set to a value of 0
(the default value), the orphan queues and schedulers do not receive bandwidth during the port
scheduler's within-cir pass and the cir-level parameter is ignored. If the cir-weight parameter is 1 or
greater, the cir-level parameter comes into play.
Values
Page 508
1 — 8 (8 is the highest priority)
1
1 — 100
1
1 — 8 (8 is the highest level)
1 — 100 (100 is the highest weight)
7950 XRS Quality of Service Guide