Configuring Queue Group For Network Ingress Traffic On Forwarding Plane - Alcatel-Lucent 7950 Quality Of Service Manual

Configuring Queue Group for Network Ingress Traffic on Forwarding Plane

The provisioning steps involved in using a queue-group for ingress traffic on a network interface
are:
•
•
•
•
7950 XRS Quality of Service Guide
Ingress and Egress Queue Group Creation and Redirection
Queue Group Template Creation:
→ Create the ingress queue group template.
→ Create the policers within the queue group template.
Queue Group Creation:
→ Identify the ingress forwarding plane on which the queue group will be needed.
→ Create a queue group with the same name as the template in the FP ingress network
configuration context. An instance ID is mandatory.
Map a Forwarding Class to the policer-id within the queue group:
→ Identify or create the network QoS policy that will be used on the ingress IP interface
where queue redirection is desired.
→ Map the desired ingress forwarding classes within the network QoS policy to the
specific policer IDs within the group (the group name will be supplied when the QoS
policy is applied to the IP interface).
Apply the network QoS policy:
→ Identify or create the IP interface requiring forwarding class redirection to the queue
group.
→ Assign the QoS policy to the IP interface and specify the queue group name and
instance ID for redirection of ingress traffic.
Page 355