Alcatel-Lucent 7950 Quality Of Service Manual page 250

Service Ingress MAC QoS Policy Match Commands
snap-pid
Syntax snap-pid snap-pid
no snap-pid
Context config>qos>sap-ingress>mac-criteria>entry
Description
Configures an IEEE 802.3 LLC SNAP Ethernet frame PID value to be used as a service ingress QoS policy
match criterion.
This is a two-byte protocol id that is part of the IEEE 802.3 LLC SNAP Ethernet Frame that follows the
three-byte OUI field.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the same
match criteria.
Note: snap-pid match criteria is independent of the OUI field within the SNAP header. Two packets with
different three-byte OUI fields but the same PID field will both match the same policy entry based on a
snap-pid match criteria.
The no form of this command removes the snap-pid value as the match criteria.
Default
none
Parameters
smap-pid — The two-byte snap-pid value to be used as a match criterion in hexadecimal.
Values
src-mac
Syntax src-mac ieee-address [ieee-address-mask]
no src-mac
Context config>qos>sap-ingress>mac-criteria>entry
Description
This command configures a source MAC address or range to be used as a service ingress QoS policy match
criterion.
The no form of this command removes the source mac as the match criteria.
Default
none
Parameters
ieee-address — Enter the 48-bit IEEE mac address to be used as a match criterion.
Values
ieee-address-mask — This 48-bit mask can be configured using:
This 48 bit mask can be configured using the following formats
Format Style
Decimal
Page 250
0x0000 — 0xFFFF
HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal digit
Format Syntax
DDDDDDDDDDDDDD
Example
281474959933440
7950 XRS Quality of Service Guide