Alcatel-Lucent 7950 Quality Of Service Manual page 337

Ingress and Egress Queue Group Creation and Redirection
In addition, the egress re-classification commands only take effect if the redirection of the spoke-
SDP to use an egress port queue-group succeeds; for example, the following CLI commands
succeed:
config>service>vprn>interface>spoke-sdp>egress>qos network-policy-id port-redirect-group
queue-group-name instance instance-id
config>service>ies>interface>spoke-sdp>egress>qos network-policy-id port-redirect-group
queue-group-name instance instance-id
Reclassification will however occur regardless of whether the queue group instance exists or not
on a given egress network port. When the redirection command fails in CLI, the PW uses the
network QoS policy assigned to the network IP interface. Since the network QoS policy applied to
a network IP interface does not support re-classification, the PW packets do not undergo re-
classification.
7950 XRS Quality of Service Guide Page 337