Overview - Alcatel-Lucent 7950 Quality Of Service Manual

In This Section

Overview

Default buffer pools exist (logically) at the port, and node levels. Each physical port has three
associated pool objects:
•
•
•
Each has three associated pool objects:
•
•
•
The overall node has one associated pool object:
•
•
For information about the tasks and commands necessary to access the command line interface
and to configure and maintain your router, refer to CLI Usage chapter in the Basic System
Configuration Guide.
Page 522
Access ingress pool
Access egress pool
Network egress pool
Access egress pool
Access ingress pool
Network egress pool
Network ingress pool
By default, each pool is associated with slope-policy default which disables the high-slope
and low-slope parameters within the pool.
7950 XRS Quality of Service Guide