Alcatel-Lucent 7950 Quality Of Service Manual page 237

Table 25: IP Protocol Names (Continued)
crudp
match
Syntax match [next-header next-header]
no match
Context config>qos>sap-ingress>ipv6-criteria>entry
config>qos>sap-egress>ipv6-criteria>entry
Description
This command creates a context to configure match criteria for ingress SAP QoS policy match IPv6 criteria.
When the match criteria have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured, then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context can consist of multiple match criteria, but multiple match statements cannot be entered per
entry.
It is possible that a SAP ingress policy includes the dscp map command, the dot1p map command, and an
IPv6 match criteria. When multiple matches occur for the traffic, the order of precedence is used to arrive at
the final action. The order of precedence is as follows:
1. 802.1p bits
2. DSCP
3. IP Quintuple or MAC headers
The no form of this command removes the match criteria for the entry-id.
Parameters
next-header next-header — Specifies the next meader to match.
match
Syntax match [frame-type {802dot3 | 802dot2-llc | 802dot2-snap | ethernet-II
no match
Context config>qos>sap-ingress>mac-criteria>entry
Description
This command creates a context for entering/editing match MAC criteria for ingress SAP QoS policy match
criteria. When the match criteria have been satisfied the action associated with the match criteria is
executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match will be executed.
A match context can consist of multiple match criteria, but multiple match statements cannot be entered per
entry.
7950 XRS Quality of Service Guide
Protocol Protocol ID
127
Description
Combat Radio User Datagram
Page 237