Configuring Queue Group On Ethernet Access Egress Port - Alcatel-Lucent 7950 Quality Of Service Manual

Configuring Queue Group on Ethernet Access Egress Port

The provisioning steps involved in using a queue-group queue on an egress access port are:
•
•
•
•
•
•
•
•
7950 XRS Quality of Service Guide
Ingress and Egress Queue Group Creation and Redirection
Queue Group Template Creation
→ Create the queue group template in the egress context
→ Create the queue within the queue group template
Queue Group Creation
→ Identify which egress port (or ports) on which the queue group will be needed (for
LAG use the primary port member)
→ Create a queue group instance with the same name as the template on the port or ports
From this point, there are two methods for regular ethernet based SAPs to have port access
egress re-direction. a). Policy based re-direction and, b). SAP based re-direction. For
Policy based redirection:
Map a Forwarding Class to the queue-id within the queue group
→ Identify or create the SAP egress QoS policy that will be used on the egress SAP
where policy-based queue re-direction is desired
→ Map the desired forwarding classes to the queue group name and the specific queue
ID within the group with the "group" keyword
Apply the SAP egress QoS policy
→ Identify or create the egress SAP requiring forwarding class redirection to the queue
group
→ Assign the QoS policy to the SAP
For SAP based redirection:
Map a Forwarding Class to the queue-id within the queue group
→ Identify or create the SAP egress QoS policy that will be used on the egress SAP
where SAP-based queue re-direction redirection is desired
→ Map the desired forwarding classes to the queue group specific queue-id, and the
keyword "port-redirect-group-queue". The actual queue-group template name is
determined by the sap instance's configuration which associated the sap-egress qos
policy in conjunction with the port-redirect-group's instance.
Apply the SAP egress QoS policy and the queue-group template's instance under the SAP.
→ Identify or create the egress SAP requiring forwarding class redirection to the queue
group
→ Assign the QoS policy and the egress queue-group template's instance to the SAP.
Page 353