Alcatel-Lucent 7950 Quality Of Service Manual page 122

Network Ingress QoS Policy Commands
fragment
Syntax fragment {true|false|first-only|non-first-only}
no fragment
Context config>qos>network>ingress>ipv6-criteria>entry>match
Description
This command configures fragmented or non-fragmented IPv6 packets as a network ingress QoS
policy match criterion.
The no form of this command removes the match criterion and matches all packets regardless of
whether they are fragmented or not.
Parameters true — Specifies to match on all fragmented IPv6 packets. A match will occur for all packets that contain
an IPv6 Fragmentation Extension Header.
false —
packets that do not contain an IPv6 Fragmentation Extension Header.
first-only —
non-first-only —
src-ip
Syntax src-ip {ip-address/mask | ip-address ipv4-address-mask|ip-prefix-list prefix-list-name]}
src-ip {ipv6-address/prefix-length | ipv6-address ipv6-address-mask}
no src-ip
Context config>qos>network>ingress>ip-criteria>entry>match
config>qos>network>ingress>ipv6-criteria>entry>match
Description
This command configures a source IPv4 or IPv6 address range to be used as a network ingress
QoS policy match criterion.
To match on the source IPv4 or IPv6 address, specify the address and its associated mask, for
example, 10.1.0.0/16. The conventional notation of 10.1.0.0 255.255.0.0 can also be used for IPv4.
The no form of the command removes the source IPv4 or IPv6 address match criterion.
Default
No source IP match criterion.
ip-address Specifies the source IPv4 address specified in dotted decimal notation.
Values
Specifies the length in bits of the subnet mask.
mask
Values
Page 122
Specifies to match on all non-fragmented IP packets. Non-fragmented IPv6 packets are
Matches if a packet is an initial fragment of the fragmented IPv6 packet.
Matches if a packet is a non-initial fragment of the fragmented IPv6 packet.
ip-address: a.b.c.d
1 — 32
7950 XRS Quality of Service Guide