Alcatel-Lucent 7950 Quality Of Service Manual page 295

Priority
Prec
UCastQ
MCastQ
BCastQ
UnknownQ
Match Criteria
Entry
Source IP
Source Port
Protocol
DSCP
Fragment
FC
Priority
7950 XRS Quality of Service Guide
Label
This parameter specifies the default enqueuing priority overrides
for all packets received on an ingress SAP using this policy that
match this rule.
High —
packet increases the likelihood of enqueuing the packet when
the ingress queue is congested.
Low —
decreases the likelihood of enqueuing the packet when the
ingress queue is congested.
Specifies the forwarding class or enqueuing priority when a
packet is marked with an IP precedence value (ip-prec-value).
Specifies the default unicast forwarding type queue mapping.
Specifies the overrides for the default multicast forwarding type
queue mapping.
Specifies the default broadcast forwarding type queue mapping.
Specifies the default unknown unicast forwarding type queue
mapping.
Specifies an IP or MAC criteria entry for the policy.
Specifies a source IP address range used for an ingress SAP QoS
policy match.
Specifies a source TCP or UDP port number or port range used
for an ingress SAP QoS policy match.
Specifies the IP protocol number to be used for an ingress SAP
QoS policy match.
Specifies a DiffServ Code Point (DSCP) name used for an
ingress SAP QoS policy match.
True —
False —
ets.
Specifies the entry's forwarding class.
Specifies the default enqueuing priority overrides for all packets
received on an ingress SAP using this policy.
Description (Continued)
Specifies that the high enqueuing parameter for a
Specifies that the low enqueuing parameter for a packet
Configures a match on all fragmented IP packets.
Configures a match on all non-fragmented IP pack-
Page 295