Alcatel-Lucent 7950 Quality Of Service Manual page 276

Service Egress QoS Policy Forwarding Class Commands
The no form of this command deletes the specified list.
Parameters ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special characters are
used, the string must be enclosed within double quotes.
prefix
Syntax prefix ip-prefix/prefix-length
no prefix ip-prefix/prefix-length
Context config>qos>match-list>ip-prefix-list
Description
This command adds an IPv4 address prefix to an existing IPv4 address prefix match list.
The no form of this command deletes the specified prefix from the list.
To add set of unique prefixes, execute the command with all unique prefixes. The prefixes are allowed to
overlap IPv4 address space.
An IPv4 prefix addition will be blocked, if resource exhaustion is detected anywhere in the system because
of QoS Policies that use this IPv4 address prefix list.
Default
none
Parameters ip-prefix — A valid IPv4 address prefix in dotted decimal notation.
Values
prefix-length — Length of the entered IP prefix
Values
Page 276
0.0.0.0 to 255.255.255.255 (host bit must be 0)
1 — 32
7950 XRS Quality of Service Guide