Alcatel-Lucent 7950 Quality Of Service Manual page 299

Explicit/Default
Service Association
Service-Id
Customer-Id
SAP
Mirror SAPs:
Mirror Dest
SAP
Sample Output
A:ALA-49# show qos sap-egress
===============================================================================
Sap Egress Policies
===============================================================================
Policy-Id
-------------------------------------------------------------------------------
1
1010
1020
===============================================================================
A:ALA-49#
configure
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
qos
exit
#--------------------------------------------------
7950 XRS Quality of Service Guide
Label
Explicit —
marking for fc-name.
Default —
The unique service ID number which identifies the service in the
service domain.
Specifies the customer ID which identifies the customer to the
service.
Specifies the a Service Access Point (SAP) within the service
where the policy is applied.
Specifies the mirror service ID which identifies the service in
the service domain.
Specifies the a Service Access Point (SAP) within the service
where the SAP egress policy is applied.
Scope
Template
Template
Template
match-list
ip-prefix-list "ip-prefix-list-1" create
description "IPv4 prefix list"
prefix 10.0.0.0/8
prefix 192.168.0.0/16
exit
exit
Description (Continued)
Specifies the egress IEEE 802.1P (dot1p) bits
Specifies that the default dot1p value (0) is used.
Description
Default SAP egress QoS policy.
Page 299