Alcatel-Lucent 7950 Quality Of Service Manual page 292

Service Queue QoS Policy Commands
Show Commands
sap-ingress
Syntax sap-ingress [policy-id] [detail]
Context show>qos
Description
This command displays SAP ingress QoS policy information.
Parameters policy-id — Displays information about the specific policy ID.
Default
Values
detail — Displays detailed policy information including policy associations.
Sample Output
Show SAP Ingress Output — The following table describes SAP ingress show command output.
Policy-Id
Scope
Description
Default FC
Priority
Criteria-type
Mode
Page 292
all SAP ingress policies
1 — 65535
Label
The ID that uniquely identifies the policy.
Exclusive —
single SAP.
Template —
SAPs on the router.
A text string that helps identify the policy's context in the con-
figuration file.
Specifies the default forwarding class for the policy.
Specifies the enqueuing priority when a packet is marked with a
dot1p-value specified.
IP —
used to select the appropriate ingress queue and corresponding
forwarding class for matched traffic.
MAC —
select the appropriate ingress queue and corresponding forward-
ing class for matched traffic.
Specifies the configured mode of the meter (trTcm or srTcm).
Description
Implies that this policy can only be applied to a
Implies that this policy can be applied to multiple
Specifies that an IP criteria-based SAP ingress policy is
Specifies that a MAC criteria-based SAP is used to
7950 XRS Quality of Service Guide