The following displays the slope policy configuration:
A:ALA-7>config>qos# info
#------------------------------------------
echo "QoS Slope/Queue Policies Configuration"
#------------------------------------------
...
...
#------------------------------------------
A:ALA-7>config>qos#
Applying Slope Policies
Apply slope policies to the following entities:
Quality of Service Guide
low-slope
exceed-slope
time-average-factor taf
slope-policy "slopePolicy1" create
description "Test"
high-slope
no shutdown
exit
low-slope
no shutdown
exit
exceed-slope
no shutdown
exit
exit
•
Ports
•
MDA (FP1)
•
FP (FP2 and higher based hardware)
start-avg percent
max-avg percent
max-prob percent
no shutdown
start-avg percent
max-avg percent
max-prob percent
no shutdown
start-avg percent
max-avg percent
max-prob percent
no shutdown
Slope QoS Policies
623