Alcatel-Lucent 7950 Quality Of Service Manual page 285

Children of the parent scheduler with a lower strict priority or that are weighted will not receive
bandwidth until all children with a higher strict priority have either reached their maximum bandwidth
or are idle. Children with the same strict level are serviced in a round robin fashion.
Values
Default
cir-weight cir-weight — Defines the weight the queue or scheduler will use at the within-cir port priority
level (defined by the cir-level parameter). The weight is specified as an integer value from 0 to 100 with
100 being the highest weight. When the cir-weight parameter is set to a value of 0 (the default value),
the queue or scheduler does not receive bandwidth during the port schedulers within-cir pass and the
cir-level parameter is ignored. If the cir-weight parameter is 1 or greater, the cir-level parameter comes
into play.
Values
cir-level cir-level — Defines the port priority the queue or scheduler will use to receive bandwidth for its
within-cir offered-load. If the cir-weight parameter is set to a value of 0 (the default value), the queue or
scheduler does not receive bandwidth during the port schedulers within-cir pass and the cir-level
parameter is ignored. If the cir-weight parameter is 1 or greater, the cir-level parameter comes into play.
Values
Default
7950 XRS Quality of Service Guide
1 — 100
1
0 — 100
0 — 8 (8 is the highest priority)
0
Page 285