Alcatel-Lucent 7950 Quality Of Service Manual page 123

ipv4-address-mask
Values
ipv6-address
Values
prefix
Values
Specifies the eight 16-bit hexadecimal pieces representing bit match criteria.
mask
Values
src-port
Syntax src-port {lt | gt | eq} src-port-number
src-port range start end
Context config>qos>network>ingress>ip-criteria>entry>match
config>qos>network>ingress>ipv6-criteria>entry>match
Description
This command configures a source TCP or UDP port number or port range for a network ingress
QoS policy match criterion.
The no form of this command removes the source port match criterion.
Default No src-port match criterion.
Parameters lt | gt | eq src-port-number — The TCP or UDP port numbers to match specified as less than (lt), greater
than (gt) or equal to (eq) to the source port value specified as a decimal integer.
Values
range start end — The range of TCP or UDP port values to match specified as between the start and end
source port values inclusive.
Values
Values
7950 XRS Quality of Service Guide
Specifies the subnet mask in dotted decimal notation.
a.b.c.d (dotted quad equivalent of mask length)
Specifies the IPv6 prefix for the IP match criterion in hex digits.
ipv6-address: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
Specifies the IPv6 prefix length for the ipv6-address expressed as a decimal integer.
1 — 128
x:x:x:x:x:x:x (eight 16-bit pieces)
1 — 65535 (decimal)
1 — 65535 (decimal)
Page 123