Table 34: Slope Policy Defaults; Default Slope Policy Values - Alcatel-Lucent 7950 Quality Of Service Manual

Default Slope Policy Values

Default Slope Policy Values
The default access ingress and egress policies are identified as policy-id 1. The default policies
cannot be edited or deleted. The following displays default policy parameters:

Table 34: Slope Policy Defaults

description
high-slope
shutdown
start-age
max-avg
max-prob
low-slope
shutdown
start-age
max-avg
max-prob
time-average-factor
The following output displays the default configuration:
ALA-7>config>qos>slope-policy# info detail
----------------------------------------------
----------------------------------------------
ALA-7>config>qos>slope-policy#
Page 526
Field
description "Default slope policy."
high-slope
shutdown
start-avg 70
max-avg 90
max-prob 80
exit
low-slope
shutdown
start-avg 50
max-avg 75
max-prob 80
exit
time-average-factor 7
Default
"Default slope policy"
shutdown
70
90
80
shutdown
50
75
80
7
7950 XRS Quality of Service Guide