Alcatel-Lucent 7950 Quality Of Service Manual page 113

Extensible routing system

Hide thumbs Also See for 7950:

Table of Contents

Any changes made to an existing policy, using any of the sub-commands, will be applied

immediately to all network interfaces where this policy is applied. For this reason, when many

changes are required on a policy, it is highly recommended that the policy be copied to a work area

policy-id. That work-in-progress policy can be modified until complete and then written over the

original policy-id. Use the config qos copy command to maintain policies in this manner.

The no form of this command deletes the network policy. A policy cannot be deleted until it is

removed from all entities where it is applied. The default network policy policy-id 1 cannot be

System Default Network Policy 1

network-policy-id — The policy-id uniquely identifies the policy on the router.

7950 XRS Quality of Service Guide