Alcatel-Lucent 7950 Quality Of Service Manual page 426

Queue Group Commands
reference-rate — When a reference-rate value is specified, the rate-per-second for each statistic is displayed
as a percentage based on the reference rate specified.
Values
card
Syntax card slot-number fp fp-number queue-group queue-group-name instance instance-id [ingress]
[access | networks] [interval seconds ] [repeat repeat] [absolute | percent-rate | reference-rate]
[arbiter root | name]
Context monitor>qos>arbiter-stats
Description
This command monitors arbiter statistics in an ingress FP queue group.
Parameters
card slot-number — Specifies the slot number associated with the queue group, expressed as an integer.
Values
fp fp-number — Specifies the FP number associated with the queue group, expressed as an integer .
Values
ingress — Displays policer statistics applied on the ingress FP.
access — Displays policer statistics on the FP access.
network — Displays policer statistics on the FP network.
queue-group queue-group-name — Specifies the name of the queue group up to 32 characters in length
instance instance-id — Specifies the identification of a specific instance of the queue-group.
Values
interval seconds — Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
percent-rate — When the percent-rate keyword is specified, the rate-per-second for each statistic is
displayed based on the reference rate of 10G.
reference-rate — When a reference-rate value is specified, the rate-per-second for each statistic is displayed
as a percentage based on the reference rate specified.
Values
Page 426
100M, 1G, 10G, 40G, 100G, 400G
1 — 20
1 — 2
1— 65535
11 seconds
11 — 60
10
1 — 999
100M, 1G, 10G, 40G, 100G, 400G
7950 XRS Quality of Service Guide