Copying And Overwriting Qos Policies - Alcatel-Lucent 7950 Quality Of Service Manual

Copying and Overwriting QoS Policies

Copying and Overwriting QoS Policies
You can copy an existing service egress or ingress policy, rename it with a new policy ID value, or
overwrite an existing policy ID. The
the destination policy ID exists.
CLI Syntax: config>qos# copy {sap-ingress | sap-egress} source-policy-id
dest-policy-id [overwrite]
The following output displays the copied policies:
A:ALA-7>config>qos# info
---------------------------------------------
...
exit
...
...
---------------------------------------------
A:ALA-7>config>qos#
Page 160
sap-ingress 100 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
sap-ingress 101 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
sap-ingress 200 create
description "Used on VPN sap"
queue 1 create
exit
queue 2 multipoint create
exit
queue 10 create
parent "VPN_be"
rate 11000
exit
option must be specified or an error occurs if
overwrite
7950 XRS Quality of Service Guide