Alcatel-Lucent 7950 Quality Of Service Manual page 511

Legend
Lvl/Wt
Cir Lvl/Wt
PIR
CIR
Parent
Service-Id
Customer-Id
SAP
Multi Service Site
Orphan Queues
Hierarchy
7950 XRS Quality of Service Guide
Label
Admin CIR/PIR: Specifies the configured value of CIR/PIR.
Assigned CIR/PIR: Specifies the PIR/CIR rate given to a mem-
ber by that parent level.
Offered CIR/PIR: Specifies the offered load on that member.
Consumed CIR/PIR: Specifies the amount of scheduler band-
width used by this member.
Specifies the priority level of the scheduler when compared to
other child schedulers and queues vying for bandwidth on the
parent schedulers during the 'above CIR' distribution phase of
bandwidth allocation.
Weight defines the relative weight of this scheduler in compari-
son to other child schedulers and queues at the same level.
Specifies the level of hierarchy when compared to other sched-
ulers and queues when vying for bandwidth on the parent sched-
uler.
Weight defines the relative weight of this queue as compared to
other child schedulers and queues while vying for bandwidth on
the parent scheduler.
Specifies the PIR rate.
Specifies the CIR rate.
Specifies the parent scheduler that governs the available band-
width given the queue aside from the queue's PIR setting.
The ID that uniquely identifies the policy.
The ID that uniquely identifies the customer.
Specifies the Service Access Point (SAP) within the service
where the policy is applied.
Specifies the multi-service site name.
Specifies the number of queues in an orphaned state.
Displays the scheduler policy tree structure.
Description
Page 511