Alcatel-Lucent 7950 Quality Of Service Manual page 275

Parameters
dot1p-outer dot1p-value — Specifies the 802.1p value to set for in-profile frames in this forwarding class.
Values
in-profile dot1p-value — Specifies the 802.1p value to set for in-profile frames in this forwarding class.
Values
out-profile dot1p-value — specifies the 802.1p value to set for out-profile frames in this forwarding class.
Values
description
Syntax description string
no description
Context config>qos>match-list>ip-prefix-list
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the context in
the configuration file.
The no form of the command removes any description string from the context.
Default none
Parameters string — The description character string. Allowed values are any string up to 80 characters long composed
of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
match-list
Syntax match-list
Context config>qos
Description
This command enables the configuration context for match lists to be used in QoS policies.
ip-prefix-list
Syntax ip-prefix-list ip-prefix-list-name [create]
no ip-prefix-list ip-prefix-list-name
Context config>qos>match-list
Description
This command creates a list of IPv4 prefixes for match criteria in QoS policies.
An ip-prefix-list must contain only IPv4 address prefixes created using the prefix command and cannot be
deleted if it is referenced by a QoS policy.
7950 XRS Quality of Service Guide
0 — 7
0 — 7
0 — 7
Page 275