Alcatel-Lucent 7950 Quality Of Service Manual page 374

Queue Group Commands
fp-redirect-group
Syntax fp-redirect-group policer policer-id
no fp-redirect-group policer
Context config>qos>network>ingress>fc
Description
This command is used to redirect the FC of a packet of a pseudowire or network IP interface to an ingress
forwarding plane queue-group.
It defines the mapping of a FC to a policer-id and redirects the lookup of the policer of the same ID in some
ingress forwarding plane queue-group instance. However, the queue-group name and instance are explicitly
provided only at the time the network QoS policy is applied to the ingress context of a spoke-sdp or a
network IP interface.
The no version of this command removes the redirection of the FC.
Parameters policer policer-id — The specified policer-id must exist within the queue-group template applied to the
ingress context of the forwarding plane
Values
fp-redirect-group
Syntax fp-redirect-group multicast-policer policer-id
no fp-redirect-group multicast-policer
Context config>qos>network>ingress>fc
Description This command is used to redirect the FC of a multicast packet of a pseudowire or network IP interface to an
ingress forwarding plane queue-group.
It defines the mapping of a FC to a policer-id and redirects the lookup of the policer of the same ID in some
ingress forwarding plane queue-group instance. However, the queue-group name and instance are explicitly
provided only at the time the network QoS policy is applied to the ingress context of a spoke-sdp or a
network IP interface.
The no version of this command removes the redirection of the FC.
Parameters
multicast-policer policer-id — The specified policer-id must exist within the queue-group template applied
to the ingress context of the forwarding plane
Values
Page 374
1—8
1—32
7950 XRS Quality of Service Guide