Network Ingress Ip Match Criteria - Alcatel-Lucent 7950 Quality Of Service Manual

Network Ingress IP Match Criteria

IP match criteria classification is supported in the ingress section of a network QoS policy.
The classification only applies to the outer IPv4 header of non-tunneled traffic, consequently the
use of an ip-criteria statement in a network QoS policy is ignored for received traffic when the
network QoS policy is applied on the ingress network IP interface in the following cases:
•
•
•
•
•
•
•
The only exception is for traffic received on a Draft Rosen tunnel for which classification on the
outer IP header only is supported.
Attempting to apply a network QoS policy containing an ip-criteria statement to any object except
a network IP interface will result in an error.
An example configuration is shown below:
7950 XRS Quality of Service Guide
Mesh SDPs in VPLS services
Spoke SDPs in VPLS and Xpipe services
Spoke SDP under an IP interface in an IES or VPRN service
Spoke SDPs in a VPRN service
Automatically created bindings using the auto-bind-tunnel command in a VPRN service
IPv6 over IPv4 tunnels
VXLAN bindings (egress VTEP, VNI)
network 10 create
ingress
ip-criteria
entry 10 create
match
dst-ip 10.0.0.1/32
exit
action fc "h2" profile in
exit
exit
Network Queue QoS Policies
Page 91