Copying And Overwriting Qos Policies - Alcatel-Lucent 7950 Quality Of Service Manual

Copying and Overwriting QoS Policies

You can copy an existing slope policy, rename it with a new policy ID value, or overwrite an
existing policy ID. The
policy ID exists.
CLI Syntax: config>qos> copy {slope-policy} source-policy-id dest-policy-
id [overwrite]
The following output displays the copied policies:
ALA-7>config>qos# info
---------------------------------------------
...
7950 XRS Quality of Service Guide
overwrite
slope-policy "default" create
description "Default slope policy."
high-slope
shutdown
start-avg 70
max-avg 90
max-prob 80
exit
low-slope
shutdown
start-avg 50
max-avg 75
max-prob 80
exit
time-average-factor 7
exit
slope-policy "slopePolicy1" create
description "Default slope policy."
high-slope
shutdown
start-avg 70
max-avg 90
max-prob 80
exit
low-slope
shutdown
start-avg 50
max-avg 75
max-prob 80
exit
time-average-factor 7
exit
slope-policy "slopePolicy2" create
description "Default slope policy."
high-slope
shutdown
start-avg 70
max-avg 90
max-prob 80
exit
low-slope
option must be specified or an error occurs if the destination
Slope QoS Policies
Page 529