Alcatel-Lucent 7950 Quality Of Service Manual page 115

ip-criteria
Syntax [no] ip-criteria
Context config>qos>network>ingress
Description
IP criteria-based network ingress policies are used to select the appropriate ingress queue and
corresponding forwarding class for matched traffic. This command is used to enter the context to
create or edit policy entries that specify IP criteria such as IP quintuple lookup or DiffServ code
point.
7750 SR OS implementation will exit on the first match found and execute the actions in
accordance with the accompanying action command. For this reason, entries must be sequenced
correctly from most to least explicit.
The classification only applies to the outer IP header of non-tunneled traffic. The only exception is
for traffic received on a Draft Rosen tunnel for which classification on the outer IP header only is
supported.
Attempting to apply a network QoS policy containing an ip-criteria statement to any object
except a network IP interface will result in an error.
The no form of this command deletes all the entries specified under this node. Once IP criteria
entries are removed from a network ingress policy, the IP criteria is removed from all network
interfaces where that policy is applied. This command is supported on FP2 and higher based
hardware and is otherwise ignored.
ipv6-criteria
Syntax [no] ip-criteria
Context config>qos>network>ingress
Description
IP criteria-based network ingress policies are used to select the appropriate ingress queue and
corresponding forwarding class for matched traffic. This command is used to enter the context to
create or edit policy entries that specify IPv6 criteria such as IP quintuple lookup or DiffServ code
point.
7750 SR OS implementation will exit on the first match found and execute the actions in
accordance with the accompanying action command. For this reason, entries must be sequenced
correctly from most to least explicit.
The classification only applies to the outer IPv6 header of non-tunneled traffic.
Attempting to apply a network QoS policy containing an ipv6-criteria statement to any object
except a network IP interface will result in an error.
7950 XRS Quality of Service Guide Page 115