Advanced Qos Policies; Basic Configurations - Alcatel-Lucent 7950 Quality Of Service Manual

Basic Configurations

A advanced QoS policy must conform to the following:
•
•
Create an Advanced QoS Policy
Configuring and applying advanced policies is optional. If no advanced policy is explicitly applied
to a SAP or IP interface, then no default advanced policy is applied.
To create a new advanced policy, define the following:
•
•
•
The following displays an example of an advanced policy configuration:
ALA-7>config>qos# info
#------------------------------------------
echo "QoS Policies Configuration"
#------------------------------------------
...
...
#------------------------------------------
ALA-7>config>qos#
7950 XRS Quality of Service Guide
Each advanced policy must have a unique policy ID.
Default values can be modified but parameters cannot be deleted.
A slope policy ID value. The system will not dynamically assign a value.
Include a description. The description provides a brief overview of policy features.
The child control parameters, parameters that are intended to allow more precise control
of the method that hierarchical virtual scheduling employs to emulate the effect of a
scheduling context upon a member child queue or policer.
adv-config-policy "childPolicy1" create
description "Test"
child-control
offered-measurement
add percent 30
granularity percent 30
exit
bandwidth-distribution
above-offered-cap percent 5
granularity percent 5
exit
exit
exit

Advanced QoS Policies

Page 547