Alcatel-Lucent 7950 Quality Of Service Manual page 541

Parameters
percent — The maximum drop probability percentage corresponding to the max-avg, expressed as a
decimal integer.
Values
shutdown
Syntax [no] shutdown
Context config>qos>slope-policy>high-slope
config>qos>slope-policy>low-slope
Description This command enables or disables the administrative status of the Random Early Detection slope.
By default, all slopes are shutdown and have to be explicitly enabled (no shutdown).
The no form of this command administratively enables the RED slope.
Default shutdown - RED slope disabled implying a zero (0) drop probability
start-avg
Syntax start-avg percent
no start-avg
Context config>qos>slope-policy>high-slope
config>qos>slope-policy>low-slope
Description This command sets the low priority or high priority Random Early Detection (RED) slope position
for the shared buffer average utilization value where the packet discard probability starts to
increase above zero. The percent parameter is expressed as a percentage of the shared buffer size.
The no form of this command restores the start-avg value to the default setting. If the max-avg
setting is smaller than the default, an error will occur and the start-avg setting will not be changed
to the default.
queue
Syntax queue queue-id drop-rate num
no queue queue-id
Context config>qos>slope-policy>high-slope
config>qos>slope-policy>low-slope
Description Sets the low priority or high priority Random Early Detection (RED) slope drop-rate for the shared
buffer per queue.
7950 XRS Quality of Service Guide
0 — 100
Page 541