Alcatel-Lucent 7950 Quality Of Service Manual page 391

If the police keyword is not specified, the individual queue group overrides may override both the
defined shaping rate and the cir defined profiling rate. When police is defined, only the policing rate
may be overridden.
policer
Syntax policer policer-id [create]
no policer
Context cfg>qos>qgrps>ing>qgrp
Description This command configures a QoS ingress queue-group policer.
Default
none
Parameters
policer-id — This required parameter identifies the queue-group policer that will either be created or edited
within the queue group template.
Values
create — This optional keyword creates an ingress queue-group policer.
profile-capped
Syntax profile-capped
no profile-capped
Context cfg>qos>qgrps>ing>qgrp>policer
Description This command enables a limit on the profile.
Default
no profile-capped
packet-byte-offset
Syntax packet-byte-offset {add bytes | subtract bytes}
no packet-byte-offset
Context cfg>qos>qgrps>ing>qgrp>policer
Description
This command configures a packet byte offset for the QoS ingress queue-group policer.
Default none
Parameters add bytes — Specifies an number of bytes to add as the offset amount.
Values
7950 XRS Quality of Service Guide
1 — 32
0 — 31
Page 391