Alcatel-Lucent 7950 Quality Of Service Manual page 300

Service Queue QoS Policy Commands
echo "QoS Policy Configuration"
#--------------------------------------------------
qos
exit
The IPv4 prefix list can be shown as follows:
*A:PE# show qos match-list ip-prefix-list "ip-prefix-list-1"
===============================================================================
QoS Match IP Prefix List
===============================================================================
Prefix Name
Description
-------------------------------------------------------------------------------
IP Prefixes
-------------------------------------------------------------------------------
10.0.0.0/8
192.168.0.0/16
-------------------------------------------------------------------------------
No. of Prefixes : 2
-------------------------------------------------------------------------------
===============================================================================
*A:PE#
queue
Syntax queue from {sap sap-id | queue-group port-id queue-group-name | network {mda-id | port-id} |
system {card slot-number | mda mda-id port port-id}} {ingress | egress} [id queue-id]
Context show>qos
Description
The show qos queue command outputs the Burst Control Group (BCG) name and slowest accurate visitation
time for the specified queues.
For each queue specified, the system may find multiple hardware queues. This may be true for ingress
queues on multipoint services (VPLS, IES, VPRN) or for queues created on an Ethernet Link Aggregation
Page 300
sap-egress 10 create
queue 1 create
exit
queue 2 create
exit
fc af create
queue 2
exit
ip-criteria
entry 10 create
match
dst-ip ip-prefix-list "ip-prefix-list-1"
exit
action fc "af"
exit
exit
exit
: ip-prefix-list-1
: IPv4 prefix list
7950 XRS Quality of Service Guide