Alcatel-Lucent 7950 Quality Of Service Manual page 177

Extensible routing system
Table of Contents

Advertisement

Parameters
policy-id — The policy-id uniquely identifies the policy.
Values
policy-name — The policy-name uniquely identifies the policy.
Values
policy-name
Syntax
policy-name policy-name
no policy-name
Context
cconfig>qos>sap-ingress
config>qos>sap-egress
Description
Policies must first be created with a policy-id, after which a policy-name can be assigned and used as an
alias to reference the policy during configuration changes. Saved configurations and display output from the
info and most show commands will show the policy-id (not the policy-name) where the policies are
referenced.
Default
no policy-name
Parameters
policy-name — Policy names may not begin with a number (0-9) or the underscore "_" character (e.g.
_myPolicy). "Default" or "default" cannot be used as policy names. Specify a character string 64
characters or less.
scope
Syntax
scope {exclusive | template}
no scope
Context
config>qos>sap-ingress policy-id
Description
This command configures the Service Ingress QoS policy scope as exclusive or template.
The policy's scope cannot be changed if the policy is applied to a service.
The no form of this command sets the scope of the policy to the default of template.
Default
template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one SAP.
If a policy with an exclusive scope is assigned to a second SAP an error message is generated. If the
7950 XRS Quality of Service Guide
1 — 65535
Valid names consist of any string up to 64 characters long. Policies must first be created
with a policy-id, after which a policy-name can be assigned and used as an alias to
reference the policy during configuration changes. Policy names may not begin with a
number (0-9) or the underscore "_" character (e.g. _myPolicy). "Default" or "default"
can not be used as policy names. Saved configurations and display output from the "info"
and most "show" commands will show the policy-id (not the policy-name) where the
policies are referenced.
Page 177

Advertisement

Table of Contents
loading

Table of Contents