Slope Qos Policies; Basic Configurations - Alcatel-Lucent 7950 Quality Of Service Manual

Basic Configurations

A basic slope QoS policy must conform to the following:
•
•
•
Create a Slope QoS Policy
Configuring and applying slope policies is optional. If no slope policy is explicitly applied to a
SAP or IP interface, a default slope policy is applied.
To create a new slope policy, define the following:
•
•
•
•
•
7950 XRS Quality of Service Guide
Each slope policy must have a unique policy ID.
High slope and low slope are shut down (default).
Default values can be modified but parameters cannot be deleted.
A slope policy ID value. The system will not dynamically assign a value.
Include a description. The description provides a brief overview of policy features.
The high slope for the high priority Random Early Detection (RED) slope graph.
The low slope for the low priority Random Early Detection (RED) slope graph.
The time average factor (TAF), a weighting exponent used to determine the portion of the
shared buffer instantaneous utilization and shared buffer average utilization used to
calculate the new shared buffer average utilization.

Slope QoS Policies

Page 523