Alcatel-Lucent 7950 Quality Of Service Manual page 278

Service Queue QoS Policy Commands
adv-config-policy
Syntax [no] adv-config-policy policy-name
Context config>qos>sap-ingress>queue
config>qos>sap-egress>queue
Description
This command specifies the advanced QoS policy. The advanced QoS policy contains only queue and
policer child control parameters within a child-control node.
Once a policy is created, it may be applied to a queue or policer defined within a sap-egress or sap-ingress
QoS policy. It may also be applied to a queue or policer defined within an ingress or egress queue-group
template. When a policy is currently associated with a QoS policy or template, the policy may be modified
but not deleted (even in the event that the QoS policy or template is not in use).
The no form of this command removes the specified advanced policy.
Default None
Parameters
policy-name — The name of the advanced QoS policy.
Values
burst-limit
Syntax burst-limit {default | size [byte | kilobyte]}
no burst-limit
Context config>qos>sap-ingress>queue
config>qos>sap-egress>queue
Description
The queue burst-limit command is used to define an explicit shaping burst size for a queue. The configured
size defines the shaping leaky bucket threshold level that indicates the maximum burst over the queue's
shaping rate.
The burst-limit command is supported under the sap-ingress and sap-egress QoS policy queues. The
command is also supported under the ingress and egress queue-group-templates queues.
The no form of this command is used to restore the default burst limit to the specified queue. This is
equivalent to specifying burst-limit default within the QoS policies or queue group templates. When
specified within a queue-override queue context, any current burst limit override for the queue will be
removed and the queue's burst limit will be controlled by its defining policy or template.
Parameters
default — The default parameter is mutually exclusive to specifying an explicit size value. When burst-
limit default is executed, the queue is returned to the system default value.
Page 278
Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
7950 XRS Quality of Service Guide