Alcatel-Lucent 7950 Quality Of Service Manual page 296

Service Queue QoS Policy Commands
Src MAC
Dst MAC
Dot1p
Snap-pid
Ethernet-type
ESnap-oui-zero
DSAP
SSAP
FC
Priority
Service Association
Service-Id
Customer-Id
SAP
sap-egress
Syntax sap-egress [policy-id] [detail]
Context show>qos
Description
This command displays SAP egress QoS policy information.
Page 296
Label
Specifies a source MAC address or range to be used as a Service
Ingress QoS policy match.
Specifies a destination MAC address or range to be used as a
Service Ingress QoS policy match.
Specifies a IEEE 802.1p value to be used as the match.
Specifies an IEEE 802.3 LLC SNAP Ethernet Frame PID value
to be used as a Service Ingress QoS policy match.
Specifies an Ethernet type II Ethertype value to be used as a
Service Ingress QoS policy match.
Specifies an IEEE 802.3 LLC SNAP Ethernet Frame OUI zero
or non-zero value to be used as a Service Ingress QoS policy
match.
Specifies an Ethernet 802.2 LLC DSAP value or range for an
ingress SAP QoS policy match.
Specifies an Ethernet 802.2 LLC DSAP value or range for an
ingress SAP QoS policy match.
Specifies the entry's forwarding class.
Specifies the default enqueuing priority overrides for all packets
received on an ingress SAP using this policy.
The unique service ID number which identifies the service in the
service domain.
Specifies the customer ID which identifies the customer to the
service.
Specifies the a Service Access Point (SAP) within the service
where the SAP ingress policy is applied.
Description (Continued)
7950 XRS Quality of Service Guide