Alcatel-Lucent 7950 Quality Of Service Manual page 524

Basic Configurations
Use the following CLI syntax to configure a slope policy:
CLI Syntax: config>qos#
high slope
low-slope
The following displays the slope policy configuration:
ALA-7>config>qos# info
#------------------------------------------
echo "QoS Slope/Queue Policies Configuration"
#------------------------------------------
...
...
#------------------------------------------
ALA-7>config>qos#
Page 524
slope-policy name
description description-string
high-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
low-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
time-average-factor taf
slope-policy "slopePolicy1" create
description "Test"
high-slope
no shutdown
exit
low-slope
no shutdown
exit
exit
7950 XRS Quality of Service Guide