Alcatel-Lucent 7950 Quality Of Service Manual page 536

Generic Commands
Operational Commands
copy
Syntax copy slope-policy src-name dst-name [overwrite]
Context config>qos
Description
This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
The copy command is a configuration level maintenance tool used to create new policies using
existing policies. It also allows bulk modifications to an existing policy with the use of the
overwrite keyword.
Parameters
slope-policy — Indicates that the source policy ID and the destination policy ID are slope policy IDs.
Specify the source policy ID that the copy command will attempt to copy from and specify the
destination policy ID to which the command will copy a duplicate of the policy.
overwrite —
destination policy will be overwritten with the contents of the source policy. If overwrite is not
specified, an error will occur if the destination policy ID exists.
ALA-7>config>qos# copy slope-policy default sp1
MINOR: CLI Destination "sp1" exists - use {overwrite}.
ALA-7>config>qos#overwrite
Page 536
Specifies to replace the existing destination policy. Everything in the existing
7950 XRS Quality of Service Guide