Alcatel-Lucent 7950 Quality Of Service Manual page 425

Monitor Commands
card
Syntax card slot-number fp fp-number ingress {access | network} queue-group queue-group-name
instance instance-id [interval seconds ] [repeat repeat] policer policer-id [absolute | percent-
rate | reference-rate]
Context monitor
Description
This command monitors policer statistics in an ingress FP queue group.
Parameters
card slot-number — Specifies the slot number associated with the queue group, expressed as an integer.
Values
fp fp-number — Specifies the FP number associated with the queue group, expressed as an integer .
Values
ingress — Displays policer statistics applied on the ingress FP.
access — Displays policer statistics on the FP access.
network — Displays policer statistics on the FP network.
queue-group queue-group-name — Specifies the name of the queue group up to 32 characters in length
instance instance-id — Specifies the identification of a specific instance of the queue-group.
Values
interval seconds — Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
policer policer-id — The specified policer-id must exist within the queue-group template applied to the
ingress context of the forwarding plane.
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
percent-rate — When the percent-rate keyword is specified, the rate-per-second for each statistic is
displayed based on the reference rate of 10G.
7950 XRS Quality of Service Guide
1 — 20
1 — 2
1— 65535
11 seconds
11 — 60
10
1 — 999
1—32
Page 425