Alcatel-Lucent 7950 Quality Of Service Manual page 222

Service Ingress QoS Policy Forwarding Class Commands
The value specified by prec-value is used to overwrite the Precedence bits within a matching routed
packets IP header ToS field.
Values
Default
An explicit dscp name or prec value must be specified for out-of-profile remarking to be applied.
policer
Syntax policer policer-id [fp-redirect-group]
no policer policer-id
multicast-policer
Syntax multicast-policer policer-id [fp-redirect-group]
no multicast-policer policer-id
broadcast-policer
Syntax broasdcast-policer policer-id [fp-redirect-group]
no broadcast-policer policer-id
unknown-policer
Syntax unknown-policer policer-id [fp-redirect-group]
no unknown-policer policer-id
profile
Syntax profile {in | out}
no profile
Context config>qos>sap-igress>fc
Description
This command places a forwarding class or sub-class into a color aware profile mode. Normally, packets
associated with a class are considered in-profile or out-of-profile solely based on the dynamic rate of the
ingress queue relative to its CIR. Explicitly defining a class as in-profile or out-of-profile overrides this
function by handling each packet with the defined profile state.
The profile command may only be executed when the forwarding class or the parent forwarding class (for a
sub-class) is mapped to a queue that has been enabled to support color aware profile packets. The queue may
only be configured for profile-mode at the time the queue is created in the SAP ingress QoS policy.
Page 222
0 — 7
None (an explicit Precedence value must be specified)
7950 XRS Quality of Service Guide