Alcatel-Lucent 7950 Quality Of Service Manual page 178

Service Ingress QoS Policy Commands
policy is removed from the exclusive SAP, it will become available for assignment to another exclusive
SAP.
The system default policies cannot be put into the exclusive scope. An error will be generated if scope
exclusive is executed in any policies with a policy-id equal to 1.
template — When the scope of a policy is defined as template, the policy can be applied to multiple SAPs
on the router.
Default QoS policies are configured with template scopes. An error is generated when the template
scope parameter to exclusive scope on default policies is modified.
default-fc
Syntax default-fc fc-name
Context config>qos>sap-ingress
Description This command configures the default forwarding class for the policy. In the event that an ingress packet does
not match a higher priority (more explicit) classification command, the default forwarding class or sub-class
will be associated with the packet. Unless overridden by an explicit forwarding class classification rule, all
packets received on an ingress SAP using this ingress QoS policy will be classified to the default forwarding
class. Optionally, the default ingress enqueuing priority for the traffic can be overridden as well.
The default forwarding class is best effort (be). The default-fc settings are displayed in the show
configuration and save output regardless of inclusion of the detail keyword.
Context be
Parameters
fc-name — Specify the forwarding class name for the queue. The value given for fc-name must be one of
the predefined forwarding classes in the system.
The sub-class-name parameter is optional and used with the fc-name parameter to define a preexisting
sub-class. The fc-name and sub-class-name parameters must be separated by a period (dot). If sub-
class-name does not exist in the context of fc -name, an error will occur. If sub-class-name is removed
using the no fc fc-name.sub-class-name force command, the default-fc command will automatically
drop the sub-class-name and only use fc-name (the parent forwarding class for the sub-class) as the
forwarding class.
Values
Default
Page 178
fc: class[.sub-class]
None (Each sub-class-name must be explicitly defined)
class: be, l2, af, l1, h2, ef, h1, nc
sub-class: 29 characters max
7950 XRS Quality of Service Guide