Alcatel-Lucent 7950 Quality Of Service Manual page 188

Service Ingress QoS Policy Commands
ethernet-ctag
Syntax [no] ethernet-ctag
Context config>qos>sap-egress
Description
This command specifies that the top customer tag should be used for egress reclassification based on dot1p
criteria. This command applies to all dot1p criteria configured in a given SAP egress QoS policy.
The no form of this command means that a service delimiting tag will be used for egress reclassification
based on dot1p criteria.
Default noethernet-ctag
ip-criteria
Syntax [no] ip-criteria
Context config>qos>sap-egress
Description
IP criteria-based SAP ingress policies are used to select the appropriate ingress queue and corresponding
forwarding class for matched traffic.
This command is used to enter the context to create or edit policy entries that specify IP criteria such as IP
quintuple lookup or DiffServ code point.
The software implementation will exit on the first match found and execute the actions in accordance with
the accompanying action command. For this reason entries must be sequenced correctly from most to least
explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries are
removed from a SAP ingress policy, the IP criteria is removed from all services where that policy is applied.
ip-criteria
Syntax [no] ip-criteria
Context config>qos>sap-egress
Description IP criteria-based SAP egress policies are used to select the appropriate ingress queue and corresponding
forwarding class for matched traffic.
This command is used to enter the context to create or edit policy entries that specify IP criteria such as IP
quintuple lookup or DiffServ code point.
The OS implementation will exit on the first match found and execute the actions in accordance with the
accompanying action command. For this reason entries must be sequenced correctly from most to least
explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries are
removed from a SAP ingress policy, the IP criteria is removed from all services where that policy is applied.
Page 188 7950 XRS Quality of Service Guide