Alcatel-Lucent 7950 Quality Of Service Manual page 427

arbiter name — — Specify the name of the policer control policy arbiter.
Values
root — Specifies the root arbiter.
port
Syntax port port-id egress network queue-group queue-group-name instance instance-id [interval
seconds] [repeat repeat] [absolute | rate] [arbiter root | name]
Context monitor>qos>arbiter-stats
Description
This command monitors arbiter statistics in an egress port queue group.
Parameters port port-id — Specifies the port ID.
Values
egress network — Specifies statistics are for an egress network queue group.
queue-group queue-group-name — Specifies the name of the queue group up to 32 characters in length.
instance instance-id — Specifies the identification of a specific instance of the queue-group.
Values
interval seconds — Configures the interval for each display in seconds.
Default
Values
repeat repeat — Configures how many times the command is repeated.
Default
Values
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed.
arbiter name — Specify the name of the policer control policy arbiter.
Values
root — Specify the root arbiter.
7950 XRS Quality of Service Guide
An existing arbiter-name in the form of a string up to 32 characters long composed of
printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces,
etc.), the entire string must be enclosed within double quotes.
slot/mda/port
1— 65535
11 seconds
11 — 60
10
1 — 999
An existing arbiter-name in the form of a string up to 32 characters long composed of
printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces,
etc.), the entire string must be enclosed within double quotes.
Page 427