Alcatel-Lucent 7950 Quality Of Service Manual page 432

Shared Queue QoS Commands
Shared Queue QoS Commands
shared-queue
Syntax shared-queue policy-name
Context config>qos
Description
This command enables the context to modify the QoS default shared-queue policy.
Parameters policy-name — The name of the default shared-queue policy.
fc
Syntax [no] fc {be | l2 | af | l1 | h2 | ef | h1 | nc}
Context config>qos>shared-queue
Description
This command specifies the forwarding class name. The forwarding class name represents an egress
queue. The fc fc-name represents a CLI parent node that contains sub-commands or parameters
describing the egress characteristics of the queue and the marking criteria of packets flowing through
it. The fc command overrides the default parameters for that forwarding class defined in the network
default policy policy-id 1.
Default See
Parameters
fc-name — The case-sensitive, system-defined forwarding class name for which policy entries will
broadcast-queue
Syntax broadcast-queue multipoint-queue-id
Context config>qos>shared-queue>fc
Description This command configures the broadcast forwarding type queue mapping for fc fc-name. The specified
queue-id must exist within the policy as a multipoint queue before the mapping can be made. Once
the forwarding class mapping is executed, all broadcast traffic on a SAP using this policy will be for-
warded using the queue-id.
The broadcast forwarding type usually tracks the multicast forwarding type definition. This command
overrides that default behavior.
The no form of the command sets the broadcast forwarding type queue-id back to the default of track-
ing the multicast forwarding type queue mapping.
Page 432
Values
default
Default Shared Queue Policy Values on page 687
be created.
Default
none
for undefined forwarding class values.
7950 XRS Quality of Service Guide