Alcatel-Lucent 7950 Quality Of Service Manual page 121

dst-port
Syntax dst-port {lt | gt | eq} dst-port-number
dst-port range start end
no dst-port
Context config>qos>network>ingress>ip-criteria>entry>match
config>qos>network>ingress>ipv6-criteria>entry>match
Description This command configures a destination TCP or UDP port number or port range for a network
ingress QoS policy match criterion.
The no form of this command removes the destination port match criterion.
Default
none
Parameters
lt | gt | eq dst-port-number — The TCP or UDP port numbers to match specified as less than (lt), greater
than (gt) or equal to (eq) to the destination port value specified as a decimal integer.
Values
range start end —
end destination port values inclusive.
Values
fragment
Syntax fragment {true | false}
no fragment
Context config>qos>ingress>ip-criteria>entry>match
Description
This command configures fragmented or non-fragmented IP packets as a network ingress QoS
policy match criterion.
The no form of this command removes the match criterion and matches all packets regardless of
whether they are fragmented or not.
Parameters true — Configures a match on all fragmented IP packets. A match will occur for all packets that have either
the MF (more fragment) bit set OR have the Fragment Offset field of the IP header set to a non-zero
value.
false —
packets that have the MF bit set to zero and have the Fragment Offset field also set to zero.
7950 XRS Quality of Service Guide
1 — 65535 (decimal)
The range of TCP or UDP port values to match specified as between the start and
1 — 65535 (decimal)
Configures a match on all non-fragmented IP packets. Non-fragmented IP packets are
Page 121