Alcatel-Lucent 7950 Quality Of Service Manual page 318

Access SAP Forwarding Class Based Redirection
4. Finally, the SAP ingress or SAP egress QoS policy must be applied to the SAP.
Redirecting a SAP forwarding class to a queue within an egress port based or ingress forwarding
plane queue group using SAP-based redirection requires four steps:
1. Create an ingress or egress queue group template. If the forwarding class redirection is in
2. Create an ingress queue group instance on the forwarding plane of the IOM/IMM/XMA,
3. Redirect the SAP ingress forwarding class policer in the SAP-ingress QoS policy using
Page 318
config>qos>sap-egress policy-id
fc fc-name
policer policer-id group queue-group-name instance instance-id
the ingress SAP path, an ingress queue group template must be created. Similarly, an
egress queue group template must be created for egress forwarding class redirection.
Optionally, you can create the queues in a template by using default parameters.
Individual queues must be created before they are associated with a forwarding class. The
default queue parameters may be overridden on each port based queue group.
or an egress port queue group with the same name as the template on the port associated
with the SAP.
On ingress:
config>card>fp>ingress>access>queue-group queue-group-name instance instance-id
[create]
On egress:
config>port>ethernet>access>egress>queue-group queue-group-name [instance
instance-id]
the keyword fp-redirect-group keyword on the policer, or SAP egress forwarding class
queue or policer using the port-redirect-group keyword. (Steps 2 and 3 may be done in
opposite order.)
On ingress:
config>qos>sap-ingress policy-id
fc fc-name
queue queue-id fp-redirect-group
On egress:
config>qos>sap-egress policy-id
fc fc-name
queue queue-id port-redirect-group-queue
config>qos>sap-egress policy-id
fc fc-name
policer policer-id port-redirect-group-queue
7950 XRS Quality of Service Guide