Alcatel-Lucent 7950 Quality Of Service Manual page 217
Extensible routing system
Hide thumbs
Also See for 7950:
- Quality of service manual (912 pages) ,
- Configuration manual (778 pages) ,
- Basic system configuration manual (576 pages)
Table of Contents
Advertisement
(default), in-profile, or out-of-profile as per previous classification. The DE=0 frames which have a profile
of undetermined will be evaluated by the system CIR marking algorithm and will be marked appropriately.
The priority option if used has no effect. All FR VLL DE=1 frames have automatically their priority set to
low while DE=0 frames have their priority set to high. Furthermore, DE=1 frames have drop-preference bit
set in the internal header. The internal settings of the priority bit and of the drop-preference bit of the frame
is independent of the use or not of the profile mode.
All other capabilities of the Fpipe service are maintained. This includes remarking of the DE bit on egress
SAP, and FR PW control word on egress network port for the packets which were classified into "out-of-
profile" at ingress SAP.
This de-1-out-profile keyword has an effect when applied to the ingress of a SAP which is part of an fpipe
service. It can also be used on the ingress of an epipe or vpls SAP.
The no form of the command disables the color profile mode of operation on all SAPs this ingress QoS
policy is applied.
Default
no de-1-out-profile
egress-fc
Syntax
egress-fc fc-name
no egress-fc
Context
config>qos>sap-ingress>fc
Description
This command configures the forwarding class to be used by the egress QOS processing. It overrides the
forwarding class determined by ingress classification but no0t the QOS Policy Propagation via BGP.
The forwarding class and/or forwarding sub-class can be overriden.
The new egress forwarding class is applicable to both SAP egress and network egress.
Default
no egress-fc
Parameters
fc-name — Specifies the forwarding class name to be used by the egress QOS processing.
Default
Values
in-remark
Syntax
in-remark dscp dscp-name
in-remark prec ip-prec-value
no in-remark
Context
config>qos>sap-ingress>fc fc-name
Description
This command is used in a SAP ingress QoS policy to define an explicit in-profile remark action for a
forwarding class or sub-class. While the SAP ingress QoS policy may be applied to any SAP, the remarking
functions are only enforced when the SAP is associated with an IP or subscriber interface (in an IES or
7950 XRS Quality of Service Guide
None. The fc name must be specified.
be, l2, af, l1, h2, ef, h1, nc
Page 217
Advertisement
Table of Contents
