Alcatel-Lucent 7950 Quality Of Service Manual page 239

IP QoS Policy Match Commands
dscp
Syntax dscp
no dscp
Context config>qos>sap-ingress>ip-criteria>entry>match
config>qos>sap-egress>ip-criteria>entry>match
config>qos>sap-ingress>ipv6-criteria>entry>match
config>qos>sap-egress>ipv6-criteria>entry>match
Description
This command configures a DiffServ Code Point (DSCP) code point to be used as a SAP QOS policy match
criterion.
The no form of this command removes the DSCP match criterion.
Default
none
Parameters dscp-name — Specifies a dscp name that has been previously mapped to a value using the dscp-name
command. The DiffServ code point can only be specified by its name.
Values
hsmda
Syntax hsmda
Context config>qos>sap-egress>fc
Description This command defines how packets matching the forwarding class will be mapped to an HSMDA queue ID.
The SAP QoS policies simultaneously support both standard service queue mappings and ESDMA queue
mappings for the same forwarding class and the hsmda node is used to separate the HSMDA mappings from
the standard mappings This allows the same QoS policy to be used on a standard MDA attached SAP and an
HSMDA attached SAP.
7950 XRS Quality of Service Guide
be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15, cs2,
cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29, af33, cp31,
cs4, cp33, af41, c p35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43, cp44, cp45, ef, cp47,
nc1, cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57, cp58, cp59, cp60, cp61, cp62,
cp63
Page 239