Alcatel-Lucent 7950 Quality Of Service Manual page 247

Service Ingress MAC QoS Policy Match Commands
dot1p
Syntax dot1p dot1p-value [dot1p-mask]
no dot1p
Context config>qos>sap-ingress>mac-criteria>entry
Description The IEEE 802.1p value to be used as the match criterion.
Use the no form of this command to remove the dot1p value as the match criterion.
Default
None
Parameters
dot1p-value — Enter the IEEE 802.1p value in decimal.
Values
dot1pmask — This 3-bit mask can be configured using the following formats:
Decimal
Hexadecimal
Binary
To select a range from 4 up to 7 specify p-value of 4 and a mask of 0b100 for value and mask.
Default
Values
dsap
Syntax dsap dsap-value [dsap-mask]
no dsap
Context config>qos>sap-ingress>mac-criteria>entry
Description
Configures an Ethernet 802.2 LLC DSAP value or range for an ingress SAP QoS policy match criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and cannot be part of the same
match criteria.
Use the no form of this command to remove the dsap value as the match criterion.
7950 XRS Quality of Service Guide
0 — 7
Format Style
7 (decimal) (exact match)
1 — 7 (decimal)
Format Syntax
D
0xH
0bBBB
Example
4
0x4
0b100
Page 247