Alcatel-Lucent 7950 Quality Of Service Manual page 297

Parameters
policy-id — Displays information about the specific policy ID.
Values
detail — Displays detailed policy information including policy associations.
SAP Egress Output — The following table describes SAP egress show command output.
Policy-Id
Scope
Description
Queue:
CIR Admin
CIR Oper
CIR Rule
PIR Admin
7950 XRS Quality of Service Guide
1 — 65535
Label
The ID that uniquely identifies the policy.
Exclusive —
single SAP.
Template —
SAPs on the router.
A text string that helps identify the policy's context in the con-
figuration file.
Specifies the administrative Committed Information Rate (CIR)
parameters for the queue. The CIR defines the rate at which the
system prioritizes the queue over other queues competing for the
same bandwidth.
The operational value derived by computing the CIR value from
the administrative CIR and PIR values and their corresponding
adaptation rules.
min —
greater than the administrative rate specified using the rate com-
mand except where the derived operational CIR is greater than
the operational PIR. If the derived operational CIR is greater
than the derived operational PIR, the operational CIR will be
made equal to the operational PIR.
max —
less than the administrative rate specified using the rate com-
mand.
closest —
closest to the rate specified using the rate command without
exceeding the operational PIR.
Specifies the administrative Peak Information Rate (PIR)
parameters for the queue. The PIR defines the maximum rate
that the queue can transmit packets through the switch fabric
(for SAP ingress queues) or out an egress interface (for SAP
egress queues).
Description
Implies that this policy can only be applied to a
Implies that this policy can be applied to multiple
The operational CIR for the queue will be equal to or
The operational CIR for the queue will be equal to or
The operational PIR for the queue will be the rate
Page 297