Table of Contents
Advertisement
Pass Function
With the headlight dimmer switch set to
the dip beam position, pressing the
bottom of the switch will activate the
pass function.
When pressed, the headlight high beam
will be switched on. It will remain on as
long as the switch is held in and will
turn off as soon as the switch is
released.
Note:
•
A lighting on/off switch is not
installed on this model. The position
light, brake/tail light and license
plate light all function automatically
when the ignition is turned to the
ON position.
•
The headlight will function when
the ignition switch is turned to the
ON position and the engine is
running.
There are two alternate ways to turn on
the
headlight
running:
• Pull in the clutch lever then turn
the ignition to the ON position. The
headlight will be on and will remain
on
when
the
released.
• With the ignition on and the
headlight dimmer switch set to the
dip beam position, pressing the
bottom of the switch will activate
the headlight. The headlight will
remain on when the switch is
released.
The headlight will go off while pressing
the starter button until the engine
starts.
without
the
engine
clutch
lever
General Information
Turn Signal Switch
When the turn signal switch is pushed
to the left or right and released, the
corresponding turn signals will flash on
and off. To turn off the turn signals,
push and release the switch in the
central position.
Horn Button
When the horn button is pushed, with
the ignition switch turned to the ON
position, the horn will sound.
Instrument SELECT Button
When the SELECT button is pressed and
released
it
highlighted in the multifunction display
screen.
Pressing and holding the SELECT button
when the motorcycle is stationary will
activate the Settings Menu in the
multifunction display (see Settings Menu
on page 74).
Instrument SCROLL Button
When the SCROLL button is pressed and
is
released it will scroll through the menu
visible
in
screen.
MODE Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the multifunction
display screen. Further presses of the
mode button will scroll through the
available riding modes (see Riding Mode
Selection on page 81).
will
select
the
the
instrument's
menu
display
101
Advertisement
Table of Contents
